Filter
Top Products
E-62
Setting the Default Color Difference Tolerance (Tolerance (Def.))
3
Use the or button of the cross key to
move the cursor to the desired registration
number (01 to 08).
4
Press the [SAMPLE] (Edit) button.
A screen used to set tolerances for the selected registration
number is displayed.
M
emo
• If registration number 01 (initial setting) is selected, or if
you select a number with which tolerances have already
been registered, a screen used to change the current
tolerance setting is displayed.
• If you select a registration number for which no tolerance
has been set, a blank screen is displayed. To set tolerances,
press the [MENU] button to display the <MENU> screen.
Move the cursor to “Create” and press the [SAVE/SEL]
button, and the tolerance setting screen is displayed.
5
Use the or button of the cross key to
move the cursor to the desired item.
M
emo
• If / is displayed at the top of the screen, you can use
the or button of the cross key to change the
combination of the specular component mode and
illuminant used for the screen display.
• If / is displayed on the left side/end of the screen, you
can use the or button of the cross key to scroll the
display screen upward or downward.