Filter
Top Products
E-104
Connecting to an External Device
Establishing the Connection between the Instrument and Printer
Set the instrument as a host and establish a connection between the instrument and Bluetooth printer via
Bluetooth communication.
Note
Confirm the following before starting the procedure below.
• The printer is turned ON and its battery has been fully charged.
• The instrument is turned ON (The Power switch is set to “|”.).
• The Bluetooth capability of the instrument is set to ON.
• A PC is not connected by Bluetooth or USB cable.
Retrieving the Bluetooth Address
[Operating Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the or button of the cross key to move
the cursor to “Communication” and then press
the [SAVE/SEL] button.
The <Communication> screen is displayed.
3
Use the or button of the cross key to move
the cursor to “Printer Reg.” and then press the
[SAVE/SEL] button.
The <Printer Reg.> screen is displayed.