E-116
Connecting to an External Device
Setting Auto Scan
Enable “Auto Scan” of the Scan Name function.
The bar code scanner should be registered with the instrument beforehand.
For the method to register the bar code scanner with the instrument, refer to page E-111 “Connecting a Bar Code
Scanner”.
[Operating Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the or button of the cross key to move
the cursor to “Communication” and then press
the [SAVE/SEL] button.
The <Communication> screen is displayed.
3
Use the or button of the cross key to move
the cursor to “Auto Scan Call” and then press
the [SAVE/SEL] button.
The <Auto Scan Call> screen is displayed.
4
Use the button of the cross key to move the
cursor to “ON” and then press the [SAVE/SEL]
button.
The Auto Scan function is set to ON.
When the setting is complete, the screen returns to the
<Communication> screen.
