Filter
Top Products
E-40
Condition Setting
Illuminant 1
Select the illuminant used to measure colorimetric data.
[Setting Procedure] Start the procedure from the <Disp. Cond.> screen.
1
Use the or button of the cross key to
move the cursor to “Illuminant 1” and then
press the [SAVE/SEL] button.
The <Illuminant 1> screen is displayed.
2
Use the or button of the cross key to
move the cursor to the desired item.
Settings
❍A: Standard illuminant A
(Incandescent lamp, Color
temperature: 2856K)
❍C: Illuminant C
(Daylight, The relative value of the spectral
distribution in the ultraviolet region is small;
Color temperature: 6774K)
❍D
50
:Illuminant D
50
(Daylight, Color temperature:
5003K)
❍D
65
:Standard illuminant D
65
(Daylight, Color
temperature: 6504K)
❍F2: Cool white (fluorescent lamp)
❍F6: Cool white (fluorescent lamp)
❍F7: Color rendering A daylight white (fluorescent
lamp)
❍F8: Color rendering AAA natural white (fluorescent
lamp)
❍F10:3-band type natural white (fluorescent lamp)
❍F11:3-band type cool white (fluorescent lamp)
❍F12:3-band type warm white (fluorescent lamp)
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the
<Disp. Cond.> screen.
Note
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
<Disp. Cond.> screen without changing the setting.