![](http://pdfasset.owneriq.net/8/79/8790550f-e2a1-47c4-8bb7-52d5646bffad/8790550f-e2a1-47c4-8bb7-52d5646bffad-bg75.png)
E-113
Connecting to an External Device
Establishing the Connection between the Instrument and Bar Code Scanner
Set the instrument as a host and establish a connection between the instrument and Bluetooth bar code
scanner via Bluetooth communication.
Note
Confirm the following before starting the procedure below.
• The bar code scanner is turned ON and its battery has been fully charged.
• The instrument is turned ON (The Power switch is set to “|”.).
• The Bluetooth capability of the instrument is set to ON.
• No PC or printer is connected via Bluetooth connection or a USB cable.
Retrieving the Bluetooth Address
[Operating Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the or button of the cross key to move
the cursor to “Communication” and then press
the [SAVE/SEL] button.
The <Communication> screen is displayed.
3
Use the or button of the cross key to move
the cursor to “Scanner Reg.” and then press
the [SAVE/SEL] button.
The <Scanner Reg.> screen is displayed.
4
Confirm that “Search” is highlighted and then
press the [SAVE/SEL] button. Available
Bluetooth devices are searched for and the
result is listed on the LCD screen.