Filter
Top Products
E-99
Connecting to an External Device
[Operating Procedure]
In general, a USB cable can be connected/disconnected while the instrument is turned ON, however, you
need to turn OFF the instrument in the procedure below.
1
Turn OFF the instrument (Slide the Power
switch to “ ”.).
2
Open the connector protection cover and
connect the B connector of the USB cable to
the USB connection terminal.
3
Connect the A connector of the USB cable to
the USB port of the PC.
• Fully insert the connector and ensure secure connection.
4
Turn ON the instrument (Slide the Power
switch to “|” .).
• When you are prompted to install the USB driver,
specify the USB driver included with the software and
complete the installation.
Connecting the Instrument via Bluetooth Communication
Use the built-in Bluetooth capability of the instrument to establish connection between the instrument
and a PC.
Note
• The Bluetooth capability of the instrument enables data communication with a PC equipped with a Bluetooth
adapter, or data printout with a Bluetooth-capable printer. Note, however, that a PC and a printer cannot be
connected simultaneously.
• The USB cable connection and Bluetooth communication link cannot be used simultaneously. When both
connections are made, priority is given to the USB cable connection.