Filter
Top Products
E-34
Condition Setting
Disp. Type
Specify items to be displayed as measurement results.
[Setting Procedure] Start the procedure from the <Disp. Cond.> screen.
1
Use the or button of the cross key to
move the cursor to “Disp. Type.” and then
press the [SAVE/SEL] button.
The <Disp. Type> screen is displayed.
2
Use the or button of the cross key to
move the cursor to the desired item.
M
emo
• Press the [SAMPLE] (Edit) button to check or uncheck
the “Disp. Type” options indicated by the cursor.
• The checked option is currently selected.
Settings
❍Absolute: Display the absolute values of the colorimetric
data.
❍Difference:
Display the color difference from the target color. The measured data which failed the pass/fail judgment
based on the specified tolerances will be highlighted in red.
❍Abs. & Diff.:
Display the absolute value and the color difference from the target color. The measured data which
failed the pass/fail judgment based on the specified tolerances will be highlighted in red.
❍Judge:
Perform judgment of whether the color difference from the target color is within the range of the
predefined tolerances. “Pass” indicates that all the items passed the judgment, and “Fail” indicates at
least one item failed the judgment.
❍Graph Spec.: Display a spectral reflectance graph.
❍Graph Diff.: Display a graph indicating the color difference from the target color.
❍Pseudo Color: Display a pseudocolor.
❍Assessments: Display deviations in hue or other factors from the target color with specific words.
The table below shows the words to be used.
* When the L*C*h color space is selected, the color assessment is indicated in the + direction only.
* The saturation is displayed only when the L*C*h color space is selected.
Δa*/Δb*/Hue (h, a*, b*) Lightness (L*) Chroma (C*)
+ RED - RED LIGHTER VIVID
+ GREEN - GREEN DARKER DULLER
+ YELLOW - YELLOW
+ BLUE - BLUE