Filter
Top Products
E-101
Connecting to an External Device
Preparation of the PC
Attach the Bluetooth adapter to the PC to enable Bluetooth communication.
Note
The following describes a basic procedure. For details, refer to the instruction manual of the Bluetooth adapter.
[Operating Procedure]
1
Install the utility software supplied with the Bluetooth adapter on the PC.
2
Attach the Bluetooth adapter to the USB port of the PC, and ensure that the PC
properly recognize the adapter.
Establishing the Connection between the Instrument and PC
Establish the connection between the instrument and PC via Bluetooth communication by setting the PC
as a host.
[Operating Procedure]
1
Make sure that the instrument is turned ON
(The Power switch is set to “|” .).
2
Make sure that the Bluetooth capability of
the instrument is set to ON. Also check that
a printer is not connected with the Bluetooth
capability and that the instrument is not
connected to the PC with a USB cable.
3
Start the Bluetooth utility software installed
on the PC.
ޓ5ECPPGT4GI