Filter
Top Products
E-36
Condition Setting
Color Space
Select the color space to be used.
[Setting Procedure] Start the procedure from the <Disp. Cond.> screen.
1
Use the or button of the cross key to
move the cursor to “Color Space” and then
press the [SAVE/SEL] button.
The <Color Space> screen is displayed.
2
Use the or button of the cross key to
move the cursor to the desired item.
Settings
❍L✽a✽b✽: L*a*b* color space
❍L
✽C✽h: L*C*h color space
❍Hunter Lab: Hunter Lab color space
❍Yxy: Yxy color space
❍XYZ: XYZ color space
❍Munsell: Munsell color space
M
emo
A value for Munsell is displayed only when observer 2° and illuminant “C” are selected.
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the <Disp. Cond.> screen.
Note
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
<Disp. Cond.> screen without changing the setting.