Filter
Top Products
E-64
Setting the Default Color Difference Tolerance (Tolerance (Def.))
Selecting Color Difference Tolerances
You can set color difference tolerances to individual target colors when they are measured. You can also
select one of the predefined tolerances (default tolerances) and use it for judgment.
M
emo
A default tolerance setting can be registered with each registration number from 01 to 08. Before shipment,
registration number 01 has been selected. Its tolerance setting is used as a default tolerance setting, which can be set
to each target color.
Note
When you select a registration number for which no tolerance has been set, the tolerance setting for each target
color is also blank.
[Setting Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the or button of the cross key to
move the cursor to “Tolerance(Def.)” and
then press the [SAVE/SEL] button.
The <Tolerance(Def.)> screen is displayed.
3
Use the or button of the cross key to
move the cursor to the desired registration
number.
M
emo
If you press the [SAMPLE] (Edit) button here, you can
check the tolerance setting of the registration number. After
checking the setting, press the [SAVE/SEL] (OK) button to
return to the <Tolerance(Def.)> screen.
4
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the <Option> screen.