Filter
Top Products
E-122
Error Messages
Messages Symptom/Possible Cause Corrective Action
WR002
LOW
ILLUMINATION
Amount of light from the xenon lamp has
dropped to 50% of its initial level.
• Deterioration of xenon lamp
• Dirt on integrating sphere
Clean the integrating sphere as explained
in “Cleaning Parts” on page E-16. If the
problem still remains, contact a
KONICA MINOLTA-authorized service
facility.
WR050
WE RECOMMEND
RE-CALIBRATION
SERVICE
Since a certain period of time has passed
since the instrument was last calibrated,
recalibration is recommended.
For recalibration service, contact a
KONICA MINOLTA-authorized service
facility.
This message display can be set to hide.
For the setting procedure, refer to page E-
118 “Showing/Hiding the Annual
Service Recalibration Recommendation
Message”.
WR112
USER
CALIBRATION
DATA NOT SET
It is necessary to input data for user
calibration before setting the user
calibration ON.
For performing user calibration, the user
calibration data must be input to the
instrument’s memory by connecting with
computer and using the optional software
before user calibration setting is set to
ON. For details of the optional software,
read the software manual.
WR120
MEASUREMENT
PROCESS
INTERRUPTED
Measurement has been canceled. When the averaging measurement setting
is set to ON, pressing any button other
than measuring button can cancel the
measurement. If it is not necessary to
cancel the measurement, do not touch
any button other than the measurement
button during measurement.
WR121
CALIBRATION
RECOMMENDED
White calibration (or user calibration
when the user calibration setting is ON)
has not been performed yet after the
power was switched on.
In order to ensure the reliability of white
calibration, performing white calibration
is recommended when the power is
switched from OFF to ON or when the
measuring environment (measurement
area, etc.) has changed.
WR123
Please restart
instrument.
It is necessary to restart the instrument.
• Memory error or incorrect clock
• Executing initialization
Turn the power OFF, and then turn it ON
again.