Filter
Top Products
E-111
Connecting to an External Device
Connecting a Bar Code Scanner
You can scan the “name” of the data to be saved in the instrument with a Bluetooth bar code scanner, and
set it as the data name saved in the instrument.
M
emo
To use the Bluetooth function of the instrument to connect a bar code scanner, preparation for starting the Bluetooth
communication is required on the instrument and bar code scanner respectively.
Note
• The CM-700d/600d is compatible with the Bluetooth bar code scanner conforming to SPP (Serial Port Profile).
• The “name” should be an ASCII character string of 11 characters or less and be suffixed with “CR+LF”.
Preparation of the Bar Code Scanner
Prepare the Bluetooth bar code scanner so that the instrument recognizes it as a Bluetooth device.
Note
The following describes the basic procedure. For details, refer to the separate manual “Bluetooth Setting-up
Guide” and the instruction manual of the Bluetooth bar code scanner.
[Operating Procedure]
1
Set the bar code scanner so that it can be used in Bluetooth communication.
Check that the communication mode of the bar code scanner is set to “Bluetooth”.
2
Check the Bluetooth address of the bar code scanner.