Filter
Top Products
E-97
Pass/Fail Judgment for Color Difference
7
Place the specimen measuring port on the
specimen, and press the measuring button.
The specimen is measured and the judgment results are
displayed according to the display type specified for the
display conditions.
• When the display type is “Absolute” or “Abs. & Diff.”
The values which failed the judgment are highlighted in red.
In the print output to the printer, “[ ]” is appended after the
failed item.
• When the display type is “Judge”
When at least one item failed the judgment, “Fail” is displayed; when all items passed the judgment,
“Pass” is displayed.
• When the judgment result is “Pass”, the results are
displayed as the screen on the right according to the
condition setting at the time of the measurement.
In the print output to the printer, “PASS” is printed.
• When the judgment result is “Fail”, the results are
displayed as the screen on the right according to the
condition setting at the time of the measurement.
In the print output to the printer, “FAIL” is printed.
M
emo
• When “Judge” is selected as the display type, “Pass” will be displayed only when all the items have passed the judgment.
• When “Absolute” or “Abs. & Diff.” is selected as the display type, the values for the items which have failed the
judgment will be highlighted in red.
• If the tolerances have not been set, or the target color data of the number selected for the measurement has been
deleted, “None” will be displayed instead of the judgment results.
• When the screen is turned OFF by the power save function, press any of the measuring or control buttons to turn
ON the screen, confirm that (Ready to measure) is displayed or Ready lamp is green, and then press the
measuring button.