Filter
Top Products
E-45
Condition Setting
Auto Averaging (Auto Ave.)
Specify the number of measurements for auto averaging.
[Setting Procedure] Start the procedure from the <Meas. Cond.> screen.
1
Use the or button of the cross key to
move the cursor to “Auto Ave.” and then
press the [SAVE/SEL] button.
The <Auto Ave.> screen is displayed.
2
Use the or button of the cross key to
specify a value.
• Use the or button of the cross key to move the
cursor to the digit on the left or right.
Setting
❍Times [1 to 10]:Specify the number of measurements,
from 1 to 10, to perform when using auto
averaging.
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the
<Meas. Cond.> screen.
Note
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
<Meas. Cond.> screen without changing the setting.