Filter
Top Products
E-18
Preparation
Inserting the Batteries
For the CM-700d/600d, the supplied AC adapter (AC-A305) or four AA-size batteries (alkaline or
nickel-metal-hydride rechargeable batteries) must be used as a power supply. Use either the AC adapter
or batteries according to your application.
Note
• Do not use manganese batteries.
• If you are not going to use the CM-700d/600d for more than two weeks, the batteries must be removed. If the
batteries are left in the instrument for a long time, battery electrolyte may leak and damage the instrument.
• Do not use batteries of different types or mix new batteries with old ones. Doing so may result in battery
explosion or shorter battery life.
• Do not touch or short-circuit the terminals inside the battery chamber. Doing so may result in breakdown of
the instrument.
[Procedure]
1
Make sure that power is OFF (Power switch is set
to “ ”).
2
Press the battery chamber cover button on the
side of the instrument and slide the cover
downward to open it.
3
Place four AA-size batteries in the battery
chamber. Make sure that the batteries are placed
in the correct direction.
4
Align the grooves of the cover with the guides on
the edge of the battery chamber opening. Press
down lightly on the cover and slide it upward to
close it.