Konica Minolta ML2020 Automobile Parts User Manual


 
E-1
Safety Precautions
To ensure correct use of this instrument, read the following points carefully and adhere to them. After
you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.
Do not use the instrument in places
where flammable or combustible gases
(gasoline etc.) are present. Doing so
may cause a fire.
Do not disassemble or modify the
instrument or the AC adapter. Doing so
may cause a fire or electric shock.
Always use the AC adapter supplied as
a standard accessory or the optional AC
adapter, and connect it to an AC outlet
of the rated voltage and frequency. If an
AC adapter other than those specified by
KONICA MINOLTA OPTICS is used,
it may result in damage to the unit, fire
or electric shock.
The instrument should not be operated if
it is damaged or the AC adapter is
damaged, or if smoke or odd smells
occur. Doing so may result in a fire. In
such situations, turn the power OFF
immediately, disconnect the AC adapter
from the AC outlet (or remove the
batteries if they are being used) and
contact the nearest KONICA
MINOLTA-authorized service facility.
If the instrument will not be used for a
long time, disconnect the AC adapter
from the AC outlet. Accumulated dirt or
water on the prongs of the AC adapter’s
plug may cause a fire and should be
removed.
Do not insert or disconnect the AC
adapter with wet hands. Doing so may
cause electric shock.
Take special care not to allow liquid or
metal objects to enter the instrument.
Doing so may cause a fire or electric
shock. Should liquid or metal objects
enter the instrument, turn the power
OFF immediately, disconnect the AC
adapter from the AC outlet (or remove
the batteries if they are being used), and
contact the nearest KONICA
MINOLTA-authorized service facility.
Do not dispose of batteries in fire, short
their terminals, apply heat to them, or
disassemble them. Also, do not recharge
them (if they are not chargeable). Doing
so may cause explosion or heat
generation, resulting in fire or injury.
Do not perform measurement with the
specimen measuring port directed
towards your eyes. Doing so may
damage your eyes.
Do not place the instrument on an
unstable or sloping surface. Doing so
may result in its dropping or overturning,
causing injury. Be careful not to drop the
instrument when carrying it.
Do not use batteries other than those
specified by KONICA MINOLTA
OPTICS. When installing batteries in
the instrument, make sure that they are
correctly oriented according to the (+)
and (-) marks. Failure to adhere to these
instructions may cause batteries to
explode or leak electrolyte, resulting in
fire, injury or air pollution.
When using the AC adapter, make sure
that the AC outlet is located near the
instrument and that the AC adapter can
be connected to and disconnected from
the AC outlet easily.
WARNING
(Failure to adhere to the following points may result
in death or serious injury.)
CAUTION
(Falling to adhere to the following points may result in
injury or damage to the instrument or other property.)