Open as PDF
hard top are to be used independently. Removal is
mandatory to prevent any possible wear and tear on the
soft top. Your vehicle warranty will not cover damage
resulting from both tops remaining on the vehicle at the
same time for extended periods of time.
Removing the Soft Top
1. Locate and remove the two boxes that contain the
Right and left door frames
Door frame attachment knobs (four for two-door
models, six for four-door models)
Right and left quarter windows
Two rear window roll up straps
Two Sunrider secure straps (if equipped)
Two rear swing gate brackets
2. Remove the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal”
in this section.
3. Remove the soft top bow assembly pivot bracket
screws (two per side) using a #T30 Torx head driver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155