Endpoint Usage Report System Reports
Polycom, Inc. 551
4 To verify that the FTP settings are functional, click Test Archive Settings.
5 When the settings are correct, click Save Settings.
Endpoint Usage Report
The Endpoint Usage Report is based on the CDRs extracted from selected
endpoints and includes entries for ISDN and IP calls. (Currently, the
RealPresence Resource Manager system reports CDRs for the Polycom HDX
Series, V and VSX Series, VVX, and CMA Desktop endpoints as well as
supported TANDBERG and LifeSize endpoint models.)
Use data from the Endpoint Usage Report to troubleshoot problems, provide
information about network traffic, and ensure accurate billing for Polycom
video calls.
To view the Endpoint Usage Report
1 Go to Reports > Endpoint Usage Report.
The Endpoint Usage Report page appears displaying the following
information for the endpoints for which CDRs are available.
Host name or IP
Address of FTP server
Specifies the server to which the archives will be
transferred. By default, the system transfers the
archives to a location on its local server. You can
change this to an external server.
FTP Port Specifies the port through which the archives will
be transferred. By default, this is system port 21.
FTP User Name/
FTP Password/
Confirm FTP Password
Specifies a user name and password
combination for accessing the FTP server. This
must be a valid user account on the FTP server.
FTP Directory Specifies the directory on the server to which the
archives will be transferred.
Field Description
Field Description
Serial Number The registered serial number of the endpoint.
Endpoint Name The registered name of the endpoint.
