Add and Monitor Endpoints and Peripherals Endpoint Operations
Polycom, Inc. 95
View Endpoint Details
To view detailed information about a managed endpoint
1 Go to Endpoint > Monitor View.
2 As needed, use the Filter to customize the endpoint list.
3 Select the endpoint of interest and click View Details.
The Device Details dialog box displays the following information:
Field Description
Identification
Name The name of the endpoint.
• Endpoint names must be unique.
• The name must be in ASCII only and may have an
unlimited number of characters. Spaces, dashes,
and underscores are valid.
• The system name might be different than the H.323
ID.
Device Type The type of endpoint. For valid types, see “Supported
Endpoint Types” on page 111.
IP Address The assigned IP address of the endpoint.
Owner The person to whom the endpoint is assigned.
Site The network site for the endpoint. By default,
endpoints are added to the Primary Site.
Note
When areas are enabled on your system, this field
shows a value of Restricted if you do not have
permission to manage the area to which the site is
assigned.
Description A free-form text field (extended ASCII only) in which
information about the endpoint can be added.
Serial Number The serial number (ASCII only) of the endpoint.The
endpoint provides the serial number if it registered
successfully or is managed.
Software Version The version of the software installed on the endpoint
(ASCII only). The endpoint provides the version
number if it registered successfully or is managed.
