Polycom RealPresence Resource Manager System Operations Guide Endpoint Fields for User Group Provisioning
250 Polycom, Inc.
Directory Search
Mode
Specifies how endpoint directory searches are
initiated by the endpoint user. Possible values are:
• Auto—The search is executed after the user stops
entering characters.
• Manual—The search is executed only when the
user explicitly clicks the Search button.
Maximum Number of
Active Web Sessions
Specifies the number of active web sessions that are
allowed. The default is 25.
Home Screen Settings
Display H.323
Extension
Lets users placing a gateway call enter the H.323
extension separately from the gateway ID.
If you do not select this setting, endpoint system users
make gateway calls by entering the call information in
this format:
gateway ID + ## + extension
Enable Availability
Control
When enabled, lets users set their availability in the
endpoint system’s local user interface.
H.323 Settings
Maximum Speed for
Receiving Calls (kbps)
Allows you to restrict the bandwidth used when
receiving calls.
If the far site attempts to call the endpoint system at a
higher speed than selected here, the call is
re-negotiated at the speed specified in this field.
The default is 384 kbps.
Preferred Speed for
Placing Calls (kbps)
Determines the speeds that will be used for calls from
this endpoint system when:
• The Call Quality selection is either unavailable or
set to Auto on the Place a Call screen
• The call is placed from the directory
If the far-site endpoint system does not support the
selected speed, the endpoint system automatically
negotiates a lower speed.
The default is 384 kbps.
Call Settings
Field For the endpoint systems being provisioned...
