Working with a Polycom DMA System Managing a DMA System
Polycom, Inc. 313
Add a Polycom DMA System
RealPresence Resource Manager system users with the Device Administrator
role can add a Polycom DMA system to a RealPresence Resource Manager
system.
To add a Polycom DMA system
1 Go to Network Device > DMA and click Add.
2 In the Add DMA dialog box, enter a unique and identifying Name and
Description for the DMA system.
3 Enter the IP Address/Host name. This field can be either the IP address of
the DMA system or the DNS host name (FQDN).
For DMA systems with multiple clusters, indicate the FQDN of the cluster
you want to use.
4 Enter the Port used to access the DMA system. The default port is
8443
.
5 Enter the Username and Password for the DMA system.
The DMA system user you use to authenticate the DMA system must have
the Administrator role and gold class of service.
6 Mark the applicable check boxes in the Used As field.
You can use your DMA system as both of the following:
Field Description
DMA Name A unique name for the DMA system.
Description A useful description for the Polycom DMA system.
IP Address/Hostname The virtual IP address for the DMA system.
For DMA systems with multiple clusters, indicate the
FQDN of the cluster you want to use.
If your DMA system is configured for a super cluster,
be sure to use the Virtual IP address for a cluster that
is co-located with the RealPresence Resource
Manager system.
Port The port used to access the DMA system.
The default port is
8443
.
MCU Pool Orders A check mark displays if the DMA system has been
enabled for MCU pool orders (conference
management).
Call Server A check mark displays if the DMA system has been
enabled for use as a call server (gatekeeper).
