Polycom RealPresence Resource Manager System Operations Guide Direct Conference Templates
436 Polycom, Inc.
Telepresence
mode (v6)
The possible values are:
•Auto (Default) - If any ITP (Immersive Telepresence)
endpoints are detected, ITP features are applied to
the conference video for all participants.The ITP
features are dynamic. If all ITP endpoints disconnect
from the conference, normal conference video
resumes for all participants. ITP features resume for all
participants if an ITP endpoint reconnects to the
conference.
•On - ITP features are applied to the conference video
for all participants regardless of whether there are ITP
endpoints connected.
•Off - Normal conference video.
Note
This field is enabled only if the RMX system is licensed
for Telepresence Mode.
Telepresence
layout mode (v6)
Enables VNOC operators and Polycom Multi Layout
Applications to retrieve Telepresence Layout Mode
information from the RMX.
The possible values include:
•Manual
• Continuous Presence - Room continuous presence
(default)
•Room Switch - Voice activated room switching
RMX Audio Settings
Echo suppression (Supported only with MPM+ or MPMx cards.) Enables an
algorithm to search for and detect sounds outside the
normal range of human speech (such as echo) and
automatically mute them when detected.
Keyboard noise
suppression
(Supported only with MPM+ or MPMx cards.) Enables an
algorithm to search for and detect keyboard noises and
automatically mute them when detected.
Audio clarity (v7) (Supported only with MPM+ or MPMx cards.) Improves
received audio from participants connected via low audio
bandwidth connections, by stretching the fidelity of the
narrowband telephone connection to improve call clarity.
The enhancement is applied to the following low
bandwidth (8kHz) audio algorithms:
G.729a and G.711.
Field Description
