Polycom RealPresence Resource Manager System Operations Guide Edit an MCU Bridge
296 Polycom, Inc.
HTTP URL (Polycom RMX systems only)
The management URL for the endpoint, if available
(ASCII only). This URL allows the RealPresence
Resource Manager system to start the endpoint ‘s
management system using the Manage function.
All Polycom endpoints allow device management
through a browser. For these endpoints, this field is
completed when the endpoint registers with the
Resource Manager system.
For third-party endpoints that do not register using an
IP address, you must enter the URL.
HTTP Port (Polycom RMX systems only)
The HTTP port number for the MCU communications.
The MCU provides the port number if it registered
successfully and is managed.
By default, in non-secure (HTTP) mode, the
RealPresence Collaboration Server uses port 80 and
in secure (HTTPS) mode, the RealPresence
Collaboration Server uses port 443.
Area The area in which the MCU resides.
This field is only visible when Areas are enabled and
the user manages more than one area.
A user can only view area-specific information for an
area(s) that he has permission to manage.
Addresses
ISDN Video
Number
The country code + city/area code + phone number for
the MCU.
Capabilities
Supported
Protocols
The communications protocols that the MCU can
support. Possible values include:
•IP (H.323) - A standard that defines the protocols
used for multimedia communications on
packet-based networks, such as IP.
•ISDN (H.320) - A standard that defines the
protocols used for multimedia communications on
switched networks, such as ISDN.
•IP (SIP) - A standard that defines the protocols used
for multimedia communications on SIP networks.
The MCU automatically provides the protocols if it
registered successfully or is managed.
Field Description
