Polycom RealPresence Resource Manager System Operations Guide Create Dynamic Software Updates for Endpoints
204 Polycom, Inc.
7 Create a
.txt
file containing the serial number(s).
a Copy and paste the serial numbers from the endpoint serial number
list to a
.txt
file that you can submit to the Polycom Product
Activation site. Put one serial number per line as shown in the
following example.
b Save the
.txt
file.
c Return to the endpoint serial number list and click Close.
The Software Updates list reappears.
8 Repeat these steps for the each endpoint or set of endpoints to be
updated. You may include all of the serial numbers for all of the different
endpoint types in the same
.txt
file.
9 Click Close.
The Software Updates list reappears.
Download the Required Software Package
To download the software package required for Polycom endpoints
1 On your local system, create a directory to which to save the software
package (if one does not already exist).
2 For Polycom endpoints, open a web browser and go to
http://support.polycom.com.
3 In the Downloads section, select the Product and Category for the
required software package.
4 Select the software package and save it to the directory created in step 1.
5 Repeat these steps for each endpoint type to be updated. Note that the
software package may contain the software for different models of the
same endpoint type.
To download the software package required for a third-party endpoint
1 On your local system, create a directory to which to save the software
package (if one does not already exist).
2 For third-party endpoints, follow the company’s recommended
procedure for downloading a software package. Save it to the directory
created in step 1.
82071007E1DACD
82070407E010CD
820418048078B2
82040903E00FB0
