Polycom RealPresence Resource Manager System Operations Guide How Bundled Provisioning Works
254 Polycom, Inc.
How Bundled Provisioning Works
In dynamic management mode, when an Polycom endpoint starts up and at
designated intervals thereafter, it automatically polls for new provisioning
information from the RealPresence Resource Manager system. If a bundled
provisioning profile exists on the RealPresence Resource Manager system that
has been associated with the endpoint, the bundled profile is sent over a secure
HTTPS connection.
In this release, the RealPresence Group system and HDX system (v3.0.3 and
higher) parameters that may be included in a bundled provisioned profile are
limited to the following types:
• Camera configuration settings
• Monitor configuration settings
• Microphone configuration settings
• Security settings (such as password length)
• Home screen settings
Considerations for Bundled Provisioning Profiles
• You can store a maximum of 1000 bundled provisioning profiles on your
RealPresence Resource Manager system.
• You cannot update software with a bundled profile.
• The software version of the endpoint must match the software version of
the endpoint from which the bundled provisioning profile was made. A
bundled profile is only compatible with endpoints of the same software
version. If the endpoint’s software version is updated, you must create a
new bundled profile.
• When using bundled provisioning profiles to provision HDX systems, you
can use them with v3.0.3 or higher. Previous versions do not supported
bundled provisioning profiles.
• Security and home screen settings are not included in bundled profiles for
RealPresence Group systems.
• You must have the Administrator role to create bundled provisioning
profiles. Users with the Device Administrator role can apply and re-assign
bundled provisioning profiles.
• Be sure to give each provisioning profile a unique name.
