Filter
Top Products
6-10 ENGINE LUBRICATION SYSTEM
Oil Hose
Oil Cooler
Removal
.Remove the following.
Engine Oil (Drain, see this chapter)
Lower Fairings (see Frame chapter)
Muffler (see Engine Top chapter)
Oil Cooler Pipe Fitting Bolts
Oil Cooler Mounting Bolts
Removal
.Drain the engine oil.
.Remove the lower fairing (see Frame chapter).
.Remove the Allen bolts from the cylinder head and the
crankcase.
.Take out the oil hose.
A. Oil Hose
B. Allen Bolt
A. Fitting Bolts
B. Moun,ting Bolts
.Remove the oil cooler.
! nsta!!ation
.Installation is the reverse of removal.
.Replace the O-rings with new ones if they are damaged.
.Tighten the Allen bolts to the specified torque (see
Exploded View).
Installation
.Installation is the reverse of removal. Note the follow-
ing.
.Replace the O-rings with new ones.
.Tighten the oil cooler pipe fitting bolts to the specified
torque (see Exploded View).