Filter
Top Products
2-6 FUEL SYSTEM
Surge Tank
Choke Cable
Surge Tank Removal
.Remove the fuel tank (this chapter).
.Remove the surge tank.
Choke Cable Adjustment
.Remove surge tank (see this chapter).
.Check choke cable free play.
O Remove the fuel tank (see Fuel Tank Removal).
O Determine the amount of choke cable play at the choke
lever. Pull the choke lever until the starter plunger lever
at the carburetor contacts with the starter plunger; the
amount of choke lever lower end travel is the amount
of choke cable play.
A. Surge Tank
B. Mounting Bolt
.Install the air cleaner element so that the mesh side faces
the carburetor.
A. Starter Plunger Lever
B. Starter Plunger
c. Play
Choke Cable Play
Standard:
2-3mm
*If the play is incorrect, loosen the locknut and turn the
adjuster at the middle of the cable until the proper
amount of choke cable play is obtained.
B. Mesh Side
A. Air Cleaner Element
B. Locknut
A. Adjuster
.Tighten the locknut against the adjuster securely.