Filter
Top Products
ENGINE TOP END 4-13
I ~ I
-L&- <D~.;~
Rocker Arm, Rocker Shaft
Rocker Arm and Rocker Shaft Removal
.Remove the camshafts (this chapter).
NOTE
0 Mark the rocker arms so they may be put back in the
same position.
.Remove the rocker shaft plug and rocker shaft. and take
off the rocker arms.
-
1. Springs (conical)
2. Springs
.Tighten the following to the specified torque (see
Exploded View).
Upper Chain Guide Bolts
Camshaft Cap Bolts
Rocker Shaft Plug
Rocker Arm and Rocker Shaft Inspection Note
.1 nspect the rocker arms and rocker shafts.
*If they are badly worn, replace them.
c. Rocker Shaft
A. Plug
B. Rocker Arms
Rocker Arm and Rocker Shaft
Installation Notes
.Blow the rocker arm oil passage clean with compressed
air and apply oil to the rocker arm bore before installa-
tion.
1. Rocker Arm
2. Oil Pressure
.Apply engine oil to the rocker shaft, and insert the shaft
running it through the cylinder head, the rocker arms
and springs.
.Install the retainer spring on each rocker arm as shown.