Filter
Top Products
9-6 WHEELS / TIRES
~
A. Rear Wheel
B. Rear Caliper Bracket
1 .Housing Stop
2. Fork Leg Stop
3. Front
OFit the collar in the right side of the hub.
.Apply grease to the speedometer gear and hub grease
seal.
.Tighten the following fasteners to the specified torque
(see Exploded View).
Axle Nut
Axle Clamp Bolts
Caliper Mounting Bolts
.Check the front brake.
Rear Wheel Installation
.Installation is the reverse of rervoval. Note the follow-
ing.
.Apply grease to the following.
Coupling Grease Seal
Wheel Hub Grease Seal
Caliper Holder Pivot
.Adjust the drive chain after installation (see Final Drive
chapter).
.Tighten the following fasteners to the specified torque
(see Exploded View).
Axle Nut
Caliper Mounting Bolts
.Check the rear brake.
Wheel I nspection
.Remove the tire from the wheel (see Tire Removal)
.Measure the rim runout by using the dial gauge.
Rear Wheel Removal
.Remove the following.
Chain Case
Rear Caliper
Cotter Pin and Axle Nut
.Remove the drive chain from the rear sprocket toward
the left (see Final Drive chapter).
.Pull out the axle.
.Move the rear wheel back and remove the caliper
bracket installed.