Filter
Top Products
COOLING SYSTEM 3-5
Coolant
.Remove the fairings.
.Place a container under the engine.
.Remove the drain plug.
Coolant Level Inspection
NOTE
OCheck the level when the engine is cold (room or
ambient temperature).
.Check the coolant level in the reservoir tank with the
motorcycle held perpendicularly.
.Check the coolant level from between the fuel tank and
the flame at the left side.
* If the coolant level is lower than the lower level line, add
coolant to the upper level line.
B. Drain Plug
A. Water Pump
.Remove the following.
Radiator Cap
Cylinder Drain Plugs
A. Reservoir Tank
B. Upper Level
Co Lower Level
Do Mounting Bolt
A. Cylinder Drain Plugs
.The coolant will drain from the radiator and engine.
.To remove the reservoir tank, remove the fuel tank.
Coolant Filling
.Tighten the drain plugs to the specified torque (see
Exploded View).
.Fill the radiator up to the thermostat housing filler neck
with coolant.
Coolant Draining