Filter
Top Products
ELECTRICAL SYSTEM 15-37
Junction Box Internal Circuit
Electrical Wiring
Wiring Inspection
.Visually inspect the wiring for signs of burning, fraying,
etc.
*If any wiring is poor, replace the damaged wiring.
.Pull each connector apart and inspect it for corrosion,
dirt, and damage.
*If the connector is corroded or dirty, clean it carefully.
If it is damaged, replace it.
.Check the wiring for continuity.
O Use the wiring diagram to find the ends of the lead
which is suspected of being a problem.
OConnect an ohmmeter between the ends of the leads.
OSet the meter to the x 1 .0 range, and read the meter.
*If the meter does not read O 0. the lead is defective.
Replace the lead or the wiring loom if necessary.