Filter
Top Products
SUSPENSION 12-13
Swing Arm
Swing Arm Sleeve Inspection
* If there is visible damage, replace the sleeve, the ball
bearing, and all the needle bearings as a set.
Removal
.Remove the following.
Rear Wheel (see Wheels/Tires chapter)
Shock Absorber Mounting Bolt (lower)
Tie-Rod Bolts (upper)
Swing Arm Shaft
A. Swing Arm Shaft
.Remove the swing arm.
Installation
.Tighten the following fasteners to the specified torque
(see Exploded View).
Swing Arm Nut
Shock Absorber Mounting Nut
Tie-Rod Nut
.Install the rear wheel (see Wheels/Tires chapter).