Filter
Top Products
15-26 ELECTRICAL SYSTEM
A. Pin Closest to Base.
1 .Dust Cover 2. Headlight Bulb
.Insert the socket by aligning the tangs with the catches
in the housing so that the triangular mark points left, and
turn it clockwise.
.Check the headlight aim after installation.
Headlight Unit Removal/lnsta!lation Note
.Install the headlight unit so that the "TOP" mark on the
lens points up.
A. Triangular Mark
Turn Signal Light Bulb Replacement Note
.Be careful not to overtighten the lens mounting screws.
A. Top Mark
B. Up
Tail/Brake Light Bulb Replacement Notes
.Insert the new bulb by aligning the pins with the
grooves in the walls of the socket so that the pin closest
to the bulb base is to the upper right.
Turn Signal Relay Inspection
.Remove the seat.
.Take the turn signal relay out of the bracket.