Filter
Top Products
ENGINE TOP END 4-9
Camshaft Chain Tensioner
Removal
.Remove the pickup coil cover.
.Remove the mounting bolts and take off the camshaft
chain tensioner.
A. Taper Part (Stopper)
B. Push Rod
.Compressing the spring against the push rod head,
insert a thin wire through the hole in the push rod to
keep the spring in place.
c. Lock Bolt
A. Camshaft Chain Tensioner
B. Mounting Bolts
.Pull out the rod from the cam chain guide (rear side)
B. O-ring
A. Wire
.Apply grease to the O-ring.
.Install the top end of a extension rod into a hole of the
chain guide.
! nsta!!ation
.Compressing the push rod. into the tensioner body and
lock it.
O Remove the lock bolt on the side of the tensioner body.
OWhile pushing the taper part of the stopper, push the
rod.
B. Chain Guide
A. Extension Rod
.Install the tensioner body on the engine.
.Apply a non-permanent locking agent to the mounting
bolts and tighten them to the specified torque (see
Exploded View).
.Pull the wire out and tighten the lock bolt.
.Install the pickup coil cover.