Filter
Top Products
5-6 CLUTCH
A. Cover Bolt
B. Holder: 57001 -1243
A. Wrench
.Remove the thrust washer, clutch hub, clutch cam,
washer, clutch housing, needle bearing, collar, and
spacer.
Clutch Installation Notes
.Clutch installation is the reverse of removal.
attention to the following items.
Pay
.Tighten the clutch cover bolts to the specified torque
(see Exploded View).
Clutch Removal
.Remove the clutch cover.
.Remove the clutch spring bolts, retainers, and springs;
then take off then clutch spring plate with the bearing
and pusher.
A. Clutch Spring Bolt
B. Retainer
C. Bearing
D. Pusher
E. Clutch Spring Plate
.Remove the friction plates and steel plates as a set.
.Remove the clutch hub nut. When loosening the hub
nut, use the clutch holder (special tool) to keep the
clutch hub from turning as shown.