Filter
Top Products
11-8 BRAKES
Calipers
Rear Brake Light Switch Adjustment
.Check the operation of the rear brake light switch by
depressing the brake pedal. The brake light should go
on after about 10 mm of pedal travel.
Front Caliper Removal
.Remove the following.
Banjo Bolt (at the caliper)
Caliper Mounting Bolts
.Remove the caliper.
B. 10 mmA. Brake Pedal
*If it does not, adjust the brake light switch.
.Turn the adjusting nut to adjust the switch.
C. Caliper Mounting Bolts
A. Banjo Bolt
B. Caliper Assembly Bolts
CAUTION
Immediately wipe up any brake fluid that spills.
A. Switch Body
B, Adjusting Nut
c. Light sooner.
D. Light later.
Rear Caliper Removal
.Remove the rear caliper in the same way as the front
caliper.