Filter
Top Products
SUSPENSION 12-9
Push Rod
Piston Rod Nut
A. Push Rod
B. Piston Rod
c. Piston Rod Nut
.Pour the fork oil into a container.
.Remove the following from the outer tube.
Dust Seal
Circlip
1. Inner Tube
2. Weight: 57001-1218
3. Outer Tube
4. Pull down.
OThe oil seal, washer, and guide bushes come off with
the inner tube.
e Hold the axle holder in a vise.
estop the cylinder from turning by using the front fork
cylinder holder (special tool).
eUnscrew the Allen bolt, then take the bolt and gasket
out of the bottom of the axle holder.
A. Dust Seal
B. Circlip
.Use the fork outer tube weight (special tool) to separate
the inner tube from the outer tube.
O Holding the inner tube by hand in a vertical position,
pull down the outer tube several times to pullout the
inner tube.
1 .Cylinder Holder: 57001 -1 297
2. Piston Cylinder Unit
3. Allen Bolt
4. Allen Wrench
5. Vise
6. Axle Holder