Filter
Top Products
ELECTRICAL SYSTEM 15-25
Lighting System
The headlight beam is adjustable both horizontally and
vertically. Headlight aiming must be correctly adjusted
both for your safety as well as that of oncoming drivers.
In most areas it is illegal to ride with an improperly
adjusted headlight.
Headlight Beam Horizontal Adjustment
.Turn the adjusting screw on the headlight rim in or out
until the beam points straight ahead. Turning the
adjusting screw clockwise makes the headlight beam
point to the left.
A. Adjusting Bolt
Headlight Bulb Replacement Notes
A. Adjusting Screw
.Install the dust cover so that the "TOP" mar~ point up
and the cover fits onto the bulb firmly as shown.
Headlight Beam Veltical Adjustment
The headlight beam is adjustable vertically. If adjusted
too low, neither low nor high beam will illuminate the road
far enough ahead. If adjusted too high, the high beam
will fail to illuminate the road close ahead, and the low
beam will bind oncoming drivers-
.Loosen the adjusting bolt and adjust the beam until the
beam points straight ahead.
.Tighten the bolt after adjusting the beam.
NOTE
o On high beam, the brightest points should be slightly
below horizontal with the motorcycle on its wheels and
the rider seated. Adjust the headlights to the proper
angle according to local regulations.
A. Top Mark
B. Up