Filter
Top Products
FUEL SYSTEM 2-7
Air Cleaner
Element Cleaning
.Remove the surge tank (see this chapter).
.Take out the air cleaner element.
A. Plug
B. Drain Hose
Air Cleaner Housing Removal
.Remove the following.
Fuel Tank (see Fuel Tank Removal)
Serge Tank
Air Cleaner Element (see Element Cleaning)
Crankcase Breather Hose
.Remove the air cleaner housing.
A. Air Cleaner Element B. Element Mesh
.Wash the element in a bath of high-flash point solvent
and then dry it with compressed air or by shaking it.
.After cleaning, saturate a clean, lint-free towel with SE
or SF class SAE30 oil and apply the oil to the element
by tapping the foam side of the element with the towel.
.Install the element so that the mesh side faces the
carburetor.
c. Bolts
A. Plugs and Bolts
B. Crankcase Breather Hose
Oil Draining
A drain hose is connected to the bottom of the air
cleaner housing, to drain oil accumulated at the bottom
of the housing.
.Drain oil by taking off the plug at the lower end of the
drain hose.