Filter
Top Products
4 - FLIGHT PLANS
78
190-00357-00 Rev E
2. Turn the large right knob to highlight the title
for the approach, departure or arrival you wish
to delete. Titles appear in light blue directly
above the procedure’s waypoints.
3. Press CLR to display a confirmation window.
4. With “Yes?” highlighted, press ENT to remove
the selected procedure.
This same process may also be used to remove
individual waypoints from the active flight plan.
To remove an individual waypoint from
the active flight plan, highlight the
waypoint you wish to remove and press
CLR.
To remove a waypoint using the CLR key:
1. With the Active Flight Plan Page displayed,
press the small right knob to activate the
cursor.
2. Turn the large right knob to highlight the
identifier for the waypoint you wish to delete.
Identifiers appear in green text.
3. Press CLR to display a confirmation window.
4. With “Yes?” highlighted, press ENT to remove
the selected procedure.
The “Activate Leg?” option is discussed earlier,
which allows you to specify which leg of the flight
plan is currently used for navigation guidance. A
shortcut also exists for this operation, using the
direct-to key.
From the Active Flight Plan Page, use the
direct-to key (press twice) to activate a
highlighted route leg...
...including any portion of an instrument
procedure, such as a procedure turn, DME arc
or holding pattern.
To activate a specific leg of the active flight plan:
1. Press the small right knob to activate the
cursor and turn the large right knob to high-
light the desired destination waypoint.
2. Press direct-to twice to display an “Activate
Leg” confirmation window.
3. With “Activate?” highlighted, press ENT.
Flight Plan Shortcuts