Filter
Top Products
9 - AUX PAGES
174
190-00357-00 Rev E
Utility Page
Turn the small right knob to display a list
of TRANSFER options. Continue turning the
small right knob to select the desired option.
• Active Flight Plan — transfers the active
ightplan,includingVNAVparameters,to/
from a second 500W-Series (or 400W-Series)
Garmin unit in a dual unit installation. This
option is the default when selecting “Crossfill”
from the default Nav Page. Active Flight
Plan information is automatically transferred
between units when the “Auto” method is
selected above.
• Flight Plan — transfers any stored flight plan
to/from a second 500W-Series (or 400W-
Series) unit, by selecting the flight plan by
number. This option is the default when
selecting “Crossfill” from the Flight Plan Cata-
log.
•
User Waypoints (all) — transfers all stored
user waypoints to/from a second 500W/400W-
Series unit.
• User Waypoint — transfers the specified
user waypoint to a second 500W/400W-Series
unit.
4. Continue turning the small right knob to
highlight the desired data option. Press ENT
select the highlighted option.
5a. For a stored flight plan (“Flight Plan” data
option), the flight plan number field is high-
lighted. Turn the small right knob to select
the desired flight plan and press ENT.
OR
5b. For a specified user waypoint (“User Waypoint”
data option), the waypoint identifier field is
highlighted. Use the small and large right
knobs to enter the identifier of the desired user
waypoint. Press ENT when finished.
6. The flashing cursor moves to the “CROSS-SIDE”
field. Turn the small right knob to select “To”
or “From” and press ENT.
7. The flashing cursor moves to the “Initiate
Transfer?” confirmation field. Press ENT to
transfer the selected data.