Filter
Top Products
6 - WPT PAGES
145
190-00357-00 Rev E
User Waypoint List
Delete User Waypoint? allows you to delete the
selected waypoint from memory.
To delete a user waypoint:
1. Select the desired waypoint on the User
Waypoint Page and press MENU to display
the User Waypoint Page Options.
2. Turn the large right knob to select “Delete
User Waypoint?” and press ENT. Press ENT
again to confirm.
Select “Delete User Waypoint?” to delete
the selected waypoint from memory.
Crossfill? allows you to transfer user waypoints
between two 400W/500W-series units in a dual
unit installation.
See Section 9 - Aux Pages - Flight Planning -
Crossfill Operation for additional details on using
the “Crossfill?” option.
User Waypoint List
The User Waypoint List allows you to review,
modify, rename or delete a selected user waypoint, or
to delete all user waypoints currently stored in memory.
At the top of the page are indications for number of
waypoint locations used and available memory.
To review and/or modify a user waypoint from the
User Waypoint List:
1. Select the User Waypoint List.
2. Turn the large right knob to highlight the
desired user waypoint.
3. Press ENT to display the User Waypoint Page
for the selected waypoint. From this page you
may review all information defining the way-
point and its position.
4. To modify the waypoint’s position or reference
waypoint information. (Keep in mind that
you’ve already selected a User Waypoint Page
which displays the desired user waypoint, so
you may skip the first two steps of the proce-
dure example.)
5. To exit the User Waypoint Page, turn the large
right knob to highlight “Done?” and press
ENT.