Filter
Top Products
6 - WPT PAGES
135
190-00357-00 Rev E
Airport Departures
3. Turn the small right knob to display a window
of available departures for the selected airport.
Continue turning the small right knob to
select the desired departure.
4. Press ENT. The cursor moves to the runway
field.
5. Turn the small right knob to display a
window of available runways. Continue turn-
ing the small right knob to select the desired
runway.
With the cursor on the “RUNWAY” field, turn
the small right knob to display a list of avail-
able runways.
NOTE: “ALL” may appear in the runway field, indicat-
ing the departure procedure applies to all runways.
For airports with parallel runways, “B” may appear
at the end of the runway designation to indicate the
departure procedure applies to both runways.
6. Press ENT. The cursor moves to the transitions
(TRANS) field.
7. Turn the small right knob to display a window
of available transitions. Continue turning the
small right knob to select the desired transi-
tion.
With the “TRANS” field highlighted, turn
the small right knob to select the desired
transition.
8. Press ENT. To remove the flashing cursor, press
the small right knob.
Airport Departure Page Options
The following option is available for the Airport
DeparturePage,bypressingtheMENU key:
Load into Active FPL?
As described earlier in this section.
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.