Filter
Top Products
6 - WPT PAGES
123
190-00357-00 Rev E
Duplicate Waypoints
7. To remove the flashing cursor, press the small
right knob.
Duplicate Waypoints
Once the identifier, facility name or location is
entered, all six airport pages display information for
the selected airport. As you enter an identifier, facility
name or location, the Spell’N’Find™ feature scrolls
through the database, displaying those waypoints
matching the characters you have entered to that point.
If duplicate entries exist for the entered facility name or
location, additional entries may be viewed by continu-
ing to turn the small right knob during the selection
process. If duplicate entries exist for an entered identi-
fier, a duplicate waypoint page appears once you select
the identifier (by pressing ENT).
When selecting a waypoint by facility name or city, you can
scroll through duplicate entries by continuing to turn the small
right knob.
To select a facility name or city location, where
duplicate entries exist:
1. Select the desired facility name or location.
2. As you spell the facility name or location,
using the small and large right knobs, the
500W-series unit Spell’N’Find feature selects
the first entry in the database based upon the
characters you have entered up to that point.
3. Continue turning the small right knob to scroll
through any additional database listings for the
selected facility name or location. You can scroll
backwards with the small right knob if you
scroll past the desired facility name or location.
4. Press ENT to select the desired facility name
or location.
5. To remove the flashing cursor, press the small
right knob.
To select a waypoint identifier from a list of
duplicates:
When selecting a waypoint by identifier, a
Duplicate Waypoints window may appear,
allowing you to select desired waypoint by
type and region.
1. Select the desired airport or navaid identifier.
2. A Duplicate Waypoints window appears. Turn
the large right knob to select the desired
waypoint and press ENT.
3. To remove the flashing cursor, press the small
right knob.