Filter
Top Products
5 - PROCEDURES
112
190-00357-00 Rev E
DO NOT USE FOR
NAVIGATION
14. As you approach the MAP, a waypoint alert
(“Arriving at waypoint”) appears in the lower
right corner.
As you approach the MAP, “Arriving at waypoint” appears in
the lower right corner of the screen.
15. As you cross the MAP, “SUSP” appears
above the OBS key, indicating that auto-
matic sequencing of approach waypoints is
suspended at the MAP. A “FROM” indication
is displayed on the Default NAV Page, but
course guidance along the final approach
course continues. Do NOT follow this extended
course. Follow published missed approach
procedures using the OBS key to initiate the
missed approach sequence.
As you cross the MAP, “SUSP” appears above
the OBS key. To execute the missed approach,
press OBS and follow the published missed
approach procedures.
NOTE: In addition to using the OBS key to initiate
the missed approach sequence, you may wish to
press the CDI key to manually switch external
CDI output to the GPS receiver. “GPS” is indi-
cated above the CDI key.
LPV Approach