Filter
Top Products
9 - AUX PAGES
178
190-00357-00 Rev E
Utility Page
Flight Timers
To view, use or reset the generic timer:
1. Select “Flight Timers” from the Utility Page.
2. The flashing cursor highlights “Start?”. To start
the generic timer, press ENT. (You typically
begin with this step for count up timers. How-
ever, for count down timers, you may wish to
enter a count direction and time before starting
the timer. See below.)
3. To change the count direction, turn the large
right knob to highlight the count direction
field: “Down” or “Up”. Turn the small right
knob to select the desired count direction. Press
ENT when finished.
4. For a count down timer, turn the large right
knob to highlight the time field. Use the small
and large right knobs to enter the count
down time — in hours, minutes and seconds.
Press ENT when finished.
5. To stop the generic timer, turn the large right
knob to highlight “Stop?” and press ENT.
6. To reset the generic timer, turn the large right
knob to highlight the time field. Press CLR,
followed by ENT.
To record or reset the departure time:
1. Select “Flight Timers” from the Utility Page.
2. Turn the large right knob to highlight the
reset mode field, under “Departure Time”.
The reset mode field indicates “Pwr-on” or
“GS>30kt”.
3. Turn the small right knob to select the desired
reset mode. (“Pwr-on” records a departure
time when the 500W-series unit is turned on.
“GS>30kt” records a departure time once
the GPS-computed ground speed exceeds 30
knots.)
The 500W-series unit can be configured to
record the departure time when the unit
is powered on or when your ground speed
exceeds 30 knots.
4. Press ENT when finished.
5. To reset the departure time, turn the large
right knob to highlight “Reset?” and press
ENT. This will reset the departure time to the
current time.