Filter
Top Products
2 - NAV PAGES
32
190-00357-00 Rev E
If no flight plan or direct-to destination has been
selected only speed, track, altitude, fuel flow and min-
imum safe altitude data may be displayed. All other
datatypesappearasblanklines—ontheDefaultNAV
Page — until a destination is selected.
To select a different data item for any data field:
1. Starting with the Default NAV Page, press the
MENU key to display an options menu.
2. Turn the large right knob to highlight
“Change Fields?” and press ENT to select this
option.
3. Use the large right knob to highlight the data
field you wish to change.
4. Turn the small right knob to display the list
of available data items. Continue turning the
small right knob to select the desired data
item from the list.
Once “Change Fields?” is selected, use the
large right knob to select the field you wish
to change and the small right knob to select
the new data type.
5. Press ENT to select the desired data item and
return to the Default NAV Page.
6. Press the small right knob to remove the
cursor from the page.
Restoring Factory Settings
You can also quickly return all data field settings to
their original factory settings.
The “Restore Defaults?” option returns all
data fields to their original factory settings.
To restore all four selectable data fields to factory
default settings:
1. Starting with the Default NAV Page, press the
MENU key to display an options menu.
2. Turn the large right knob to highlight the
“Restore Defaults?” option and press ENT.
Dual Unit Considerations (Crossfill)
A“Crossll?”optionisprovidedfromtheDefault
NAVPage.Thisoptionallowsyoutotransferadirect-
todestination,theactiveightplanincludingVNAV
parameters, any stored flight plan or user waypoints to
a second 400W or 500W-series Garmin unit.
See Section 9 - Aux Pages - Flight Planning -
Crossfill Operation for additional details on using the
“Crossfill?” option.
NOTE: The databases of the 400/500 series and the
400W/500W are incompatible, so you may not mix
systems.
Default NAV Page