Filter
Top Products
6 - WPT PAGES
146
190-00357-00 Rev E
User Waypoint List
To rename a user waypoint from the User
Waypoint List:
1. Select the User Waypoint List.
2. Turn the large right knob to highlight the
desired user waypoint.
3. Use the small and large right knobs to
change the name of the user waypoint. (Enter
the new name directly over the old name.)
Press ENT to accept the new name.
From the User Waypoint List, use the small and large right
knobs to rename an existing waypoint. Press ENT to display a
“Rename Waypoint” confirmation window.
4. A “Rename Waypoint” confirmation window is
displayed. With “Yes?” highlighted, press ENT
to rename the selected user waypoint.
To delete a user waypoint from the User Waypoint
List:
1. Select the User Waypoint List.
2. Turn the large right knob to highlight the
desired user waypoint.
3. Press CLR to display a “Delete Waypoint”
confirmation window.
4. With “Yes?” highlighted, press ENT to delete
the selected user waypoint.
With the desired waypoint highlighted on the User Waypoint
List, press CLR to display a “Delete Waypoint” window.