Filter
Top Products
9 - AUX PAGES
172
190-00357-00 Rev E
Flight Planning
3. Use the small and large right knobs to enter
the message text. Press ENT when finished.
(The 500W-series
unit
stores up to nine sched-
uled messages holding 20 characters each.)
4. The flashing cursor moves to the type field
under the new message. Turn the small right
knob to display a window of available options:
Event, One Time or Periodic. Press ENT to select
the highlighted option.
Turn the small right knob to select the
desired message type. One Time and Periodic
messages appear when the time expires.
Event-based messages expire at a specified
time and date.
5. The flashing cursor moves to the time (or date)
field. Use the small and large right knobs
to set the time (or date) required before the
message is displayed. Time is entered as hours/
minutes/seconds (hhh:mm:ss). Event-based
messages expire at a specified date and time.
Press ENT when finished entering time (or
date).
Use the small and large right knobs to enter
the time or date.
To edit a scheduled message:
1. Select “Scheduler” from the Flight Planning
Page.
2. The flashing cursor highlights the first message
field.
3. To edit the message text, turn the large right
knob to highlight the desired message field.
Use the small and large right knobs to edit
the message text — entering the new text
directly over the old message. Press ENT when
finished.
4. To edit the time field, turn the large right
knob to highlight the field. Use the small and
large right knobs to edit the new date or time
— entering the new value directly over the old
figure. Press ENT when finished.
To delete a scheduled message:
1. Select “Scheduler” from the Flight Planning
Page.
2. The flashing cursor highlights the first message
field. Turn the large right knob to highlight
the desired message field.
3. Press CLR to delete the message text, followed
by ENT to confirm the deletion.