Filter
Top Products
7 - NRST PAGES
158
190-00357-00 Rev E
trolled airspace are also sectorized to provide complete
information on any nearby airspace. Once one of the
described conditions exists, the message annunciator
flashes, alerting you of an airspace message (if airspace
alert messages are enabled). See Sec 9 - Aux - Setup 1
-CDI/Alarmsformoreinformation.
To view an airspace alert message:
1. When the message annunciator above the
MSG key flashes, press MSG.
Press MSG to view an airspace alert message.
Press MSG again to remove the message
window and return to the previous page.
2. Press MSG again to return to the previous
page.
Once you have been provided an airspace alert
message, detailed information concerning the specific
airspace is provided on the Nearest Airspace Page.
The Nearest Airspace Page displays the airspace name,
status (“Ahead”, “Ahead < 2nm”, etc. as described on
the previous page), and a time to entry (if applicable).
By selecting any airspace name listed on the Nearest
Airspace Page, additional details are provided —
including controlling agency, communication frequen-
cies and floor/ceiling limits.
To view additional details for an airspace listed
on the Nearest Airspace Page:
1. Select the Nearest Airspace Page.
Airspace Name
Status and
Time to Entry
Message
Annunciator
Eighth Page
in NRST Group
2. Press the small right knob to activate the
cursor.
3. Turn the large right knob to scroll through
the list, highlighting the desired airspace.
STEP 3 & 4: From the Nearest Airspace Page,
highlight the desired airspace and press ENT
to display additional airspace information.
4. Press ENT to display the Airspace Information
Page for the selected nearby airspace.
5. To return to the Nearest Airspace Page, verify
that “Done?” is highlighted by the flashing
cursor and press ENT.
6. Press the small right knob to remove the
flashing cursor.
Nearest Airspaces